Panasonic Omnivision PV-9661 - Page 79

file:///E:/PV-9661_PV-9662/SVC/s0501080200.html
5.1.8.2 Reassembly Notes
TOP PREVIOUS NEXT
Installation of Cassette Up Ass´y
1. Confirm that the 3 pins and Locking Tab (J) under the Cassette Up Ass´y are in each of the 4
Guide Holes on the Mechanism Chassis when installing the Cassette Up Ass´y. Then, slide the
Cassette Up Ass´y towardsthe back.
2.
Slide Holder Unit (refer to " METHOD FOR LOADING/UNLOADING OF MECHANISM "
in Service Notes) to tighten 2 Screws (J) and Screw (K).
Be careful not to tighten screws too much, or the Cassette Up Ass´y may be bent outward.
Then, slide it back to the EJECT Position.
3. Hook Spring (A) to the Drive Rack Arm on the Mechanism Chassis.
TOP PREVIOUS NEXT
file:///E:/PV-9661_PV-9662/SVC/s0501080200.html [2006-01-28 11:09:40]