Panasonic OmniVision PV-C2020 User Manual

TV Operation
•it
.
1
HH^TpowerVH|H|
Press POWER on [
1
the remote or unit. r
r
Select a channel.
Using CH AT or
NUMBERED
keys.
or
CD OD CD
CD CD CD
CD CD CD
® CD
Adjust volume.
Press VOL +
NIGHT (NITE) Mode
Color and picture intensity levels are adjusted so the screen is
easier on your eyes during night time use.
S',
Check list before you begin.
NIGHT
Set NIGHT mode.
Press NITE.
• NIGHT mode may be
selected when watching
TV, playing a tape, or
while in FM mode.
NITE
O
To Cancel, press NITE.
• Previous settings are restored.
• NIGHT mode is canceled when
power is turned off or power
failure occurs.
■ Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key, and then enter the
remaining two digits.
■ Rapid Tune
Press R-TUNE to display the last channel you were watching.
■ Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
■ Phones
Connect an earphone (not supplied) or headphones (not
supplied) to the Phones Jack.
■ SELF-DEMO Mode
With Power ON, hold down PLAY/REPEAT on the unit for 5
seconds to display demo screen.
Repeat this to exit.
10
For assistance, call 1>800-211-PANA(7262)

Panasonic OmniVision PV-C2020 Specifications

General

Brand	Panasonic
Model	OmniVision PV-C2020
Category	VCR
Language	English