Panasonic OmniVision PV-C2020 User Manual

Timer Recording
You can set up to 8 programs to be recorded while you are away.
SET PROGRAM
VCR Plus* PROGRAMMING
ITIMER PROGRAMING
ON TIMER
SELECT : A ▼ KEY
SET : ► KEY
END : PROG KEY
___
Display PROGRAM screen.
Press PROG/VCR+.
Select TIMER PROGRAM.
1) Press AT
to select.
2) Press ► to
display.
• If a program is already in memory,
press AY, and ► to select an
unused program number.
CATEGORY :N/A SLP
ISELECT START DATEl
SELECT:* t KEY
SET : ► KEY
END :PROG/ACTION KEY
Set the recording DATE.
1) Press AT
to select.
2) Press ► or ^
to set.
• 1—31 = One time
• DAILY = MON~FRI
•WEEKLY SUN-SAT
,.8-9.3.-1-2.6-
Today’s —7 SELECTA/Y Selection Order
Date L WEEKLY WEEKLY WEEKLY
(SAT) (MON) (SUN)
DAILY
J
= Same time once a
week
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Category [N/A (not applicable),
SPORTS, MOVIE, COMEDY,
MUSIC, DRAMA]
• Speed (SP, LP, SLP)
1
DATE START STOP CH
l
11
TODAY
CATEGORY: MOV IE
ABC
SP
SET COMPLETED
WISH TO MAKE NOTES:* KEY
SET : ■ * ► KEY
END :PROG/ACT I ON KEY
Make the notes.
(If not wanted, go to step 5.)
i)
C
Characters will change
in the following order.
A-B-C . 2 - BLANK-&
2-1-0—/-!
Press A to
begin.
Press AT to
select.
Press ► or M
to set.
Press
PROG/VCR+
(or ACTION)
to end.
Continued on the next page.
• 2 minutes before Timer recording is performed, “PLEASE PREPARE FOR
TIMER REC" appears and/or the PROG TIMER indicator flashes. Be sure
a cassette with record tab is loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered program
will have priority.
• If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 13), the Timer Recording will not be
performed.
• If there is a power interruption of more than one minute, the recording
may not be performed or continue.
• If “INCOMPLETE” appears after all items have been set, check all entries
and make necessary corrections.
14
Check list before you begin.
lD All connections are made. (See page 7.)
LH Your unit is plugged in.
I I The clock is set to correct time.
□ The tape is long enough.
ED The record tab is in place.
*0 OS*
CD CD CD^
CD CD CDl
CD CD CD
AOOOLT
® CD COD
RfW - KAY FF -
O 1 » > ©
PAUSE OM SHIP STOP SURCH
0O0D
UCr*
TJt* SPttDCOWTE* RFC
<300®
POSITK*_fl£5£T
SET
SELECT
a;CH UP
▼ : CH DOWN
► :VOL UP
◄ :VOL DOWN
PROG/VCR+
_ Timer Recording Using _
unit Buttons
You can set a Timer Recording using
ACTION key on the unit. (See page 9.)
VOL CH S TOP/EJECT REW-
oeoo E30
*0 Press STOP/EJECT and REW
together without a tape inserted to
display MAIN MENU.
!l Press AT + - to select “VCR"
and STOP/EJECT and REW together
to display SET UP VCR screen.
3 Press AV to select “TIMER
PROGRAM” and + to display the
TIMER PROGRAM screen.
4 Repeat main steps 3-6.
For assistance, call 1-800-211-PANA(7262)

Panasonic OmniVision PV-C2020 Specifications

General

Brand	Panasonic
Model	OmniVision PV-C2020
Category	VCR
Language	English