Panasonic OmniVision PV-C2020 User Manual

Playback a Tape
E^Check list before you begin.
0 All connections are made. {See page 7.)
0 Your unit is plugged in.
Insert a cassette.
• The unit power comes on
automatically.
To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
C-fJO EJECT MU
EJECT-ISM®) O
PAUSE'
/SLOW
O O O
-TRACKING
Matt CMS** STOP SfA«W
0 t i i •t — ^ —
SPfHJ COUNTER REC
BOO®
PQSfTXW_PE5FT_
-STOP
■ \ ^ Press PLAY.
^ I > I • Playback begins if cassette
* _ has no record tab.
To Find a Particular Scene
Forward Search -» Press FF
(To release, press PLAY or FF)
Reverse Search -4 Press REW
(To release, press PLAY or REW)
To view a Still (Freeze) picture -4
Press PAUSE/SLOW (To release, press PLAY)
To view in Slow Motion -»
Press and hold PAUSE/SLOW in the Still mode
(To release, press PLAY)
To view Frame by Frame Advance -4
Press PAUSE/SLOW in the Still mode (To release, press PLAY)
After the unit is in Still or Slow mode for 3 minutes, it will switch to
Stop mode automatically to protect the tape and the video head,
■ To stop -4 Press STOP
■ To rewind tape -4 Press REW in Stop mode
■ To fast forward tape 4 Press FF in Stop mode
■ To eject tape -4 Press EJECT on the remote or
STOP/EJECT on the unit
Features for a Quality Picture
Diaital Auto Trackin
Continuously analyzes the signal and adjusts for optimum
picture quality.
Manual Tracking Control (to reduce picture noise
Use during Playback and Slow Motion mode to reduce picture noise.
Press the 3 or 6 NUMBERED key on the remote control or CHAT
on the unit until the picture clears up. To return to Auto Tracking,
press POWER off, then on again a few seconds later.
PanaBlack^_Picture_Tube_
This unit uses a PanaBlack ™ picture tube for better color
reproduction and picture contrast.
For assistance, call 1-800-211-PANA(7262)

Panasonic OmniVision PV-C2020 Specifications

General

Brand	Panasonic
Model	OmniVision PV-C2020
Category	VCR
Language	English