Panasonic OmniVision PV-C2020 User Manual

Commercial Skip
This unit fast forwards (skips) over 1-3 minutes of recorded
tape during Play mode.
Set Skip Time.
Press CM Skip repeatedly
to select skip time.
OFF
t
1st Press — ► 1 min Skip
2nd Press —*2 min Skip
3rd Press— ► 3 min Skip
Program End Search
It is easy to detect the end of a recorded program so that you may
continue or being a new recording.
Display SELECT
SEARCH MODE in
Playback or Stop mode.
Press SEARCH on the remote.
SELECT SEARCH MODE
ZERO SEARCH
INDEX SEARCH_
[PROGRAM END SEARCH
PROGRAM INDEX SEARCH
SELECT:* ▼ KEY
SET : ► KEY
END : SEARCH KEY
Display PROGRAM END
SEARCH.
1) Press AT
to select.
2) Press ►
to start search.
Example of Program End Search operation.
Fi g-1 PLAYBACK DIRECTION
| f Program 1 1
1
Program 2 or BLANK
Press SEARCH button
Y,End Point |
FF
Fia.2
Program 1
f BLANK |||j| Program 2
BLANK j
1
3 ress SEARCH button
'^End Point |
FF
FigJ If search exceeds few seconds in BLANK area.
Press SEARCH button
[psograu 1
| 1 BLANK
I
PROGRAM 2 ||
/
:: FF r~i
|End Point (
It Program End Point is found.
The search continues slightly beyond the end point, then search and reverse
search and plays the last few seconds of the program and finally stop.
f Program 1 (BLANK)
Program 2 (BLANK)
n -
Press SEARCH button
SEARCH
FF
■ REVERSE
PLAY U
:SEARCH
STOP
• If Program End Search is started very close to an index mark, one
program may be skipped over.
• If you want to cancel Program End Search. Press PLAY or STOP.
26
Your unit is equipped with several time
saving features as well as convenient
automatic functions which make tape
operation easier than ever.
Tape Position Display
To find out the present tape position.
Tape position cannot be detected for
C-Cassette and tapes of less than 60 minutes.
Detect Tape
Position.
Press TAPE
POSITION.
TAPE
|[oQo|
POSITION
---.“DETECTING TAPE
DETECTING TAPE POSITION POSITION” is
displayed only when
a cassette is first
inserted.
• It takes several
seconds for correct
tape position to
appear.
•The present tape
position indication is
display.
f
rr
ZZ3
SEGiN
END
TAPE
POSITION
Return to
normal
screen.
Press TAPE
POSITION.
For assistance, call 1-800-211-PANA(7262)

Panasonic OmniVision PV-C2020 Specifications

General

Brand	Panasonic
Model	OmniVision PV-C2020
Category	VCR
Language	English