This unit can be set to automatically power on in one of 3 modes (TV,
Playback, or FM radio.) You can also combine the On-Timer with a one
minute alarm that gradually increases in volume.
Display PROGRAM
screen.
Press PROG/VCR+*
2
SET PROGRAM
VCR Plus+ PROGRAMMk'_
TIMER _ING
m
SELECT:• • KEY
SET :• KEY
END :FROG KEX
Select ON-TIMER.
1) Press&T
,_, to select.
2) Press l_to
- display•
3
SELECT ;• • KEY
SET :_ KEY
END :PROG
Set the ON-TIMER TIME.
. 1) Press ATto
,_, select.
2) Press•
to set.
_'_['.[II] l|[l],lJll
• ON-TIMER mode selection order
_,*CH02mCH03.....CH125-_
CH01 PLAY
!_.FM9 --FM 8..... FM1._.,_
• Make sure a tape is
inserted if Playback
mode is selected.
• See "FM Radio" on
pages 34 and 35 for
instructions on how
to preset FM
stations.
ON TIMER
SE_.-CT:• • KEY
_ :.4 • KEY
Set Alarm.
Press &_' to
select "ON" or
.... OFF."
When "ON" is selected,
an alarm willgradually increase involume for one minute or until
canceled by pressingany button (includingVOL + -.)
To Make Corrections,
useAV and • • to moveback and correctas necessary.
5
Set ON TIMER.
O_ _ Press PROG/VCR+.
• "ON TIMER SET" is displayed.
• ON TIMER indicator lights on the unit.
_lf'Check list before you begin.
[] The clock is set to correct time.
Model PV-C2060 unit is shown here.
[- _ ',ili
ON TIMER indicator
2SET
I EJECT UG_;T
G>@®
(3D QD G3
{_) (3D G3_-
t5 _'_' 15-t
_,) SELECT
/_.} _:CH UP
/*
Av:CH DOWN
'HI'1,:VOL UP
_I:VOLDOWN
1
• PROG/VCR+
5
ADD/DLT
To cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to clear the time in step 3.
Now, press PROG to end. "ON TIMER END" appears on-screen for a If no button on the remote or unit (including
few seconds, a button used to turn off the alarm) is
pressed within 60 minutes after unit turns
itself on, it will turn itself back off.
To Next Page
Loading...
