Panasonic Omnivision PVQ-V200 User Manual

Special VCR Features
Tape Position Display Feature
To find out the present tape position.
Tape position cannot be detected for VHS-C Cassette types
and tapes of less than 60 minutes length.
Detect Tape Position.
Press TAPE POSITION.
[DETECTING TAPE POSITION J
' "'''n
BEGIN END
“DETECTING TAPE POSITION’
only appears the first time a
cassette is inserted.
It takes several seconds for
correct indication to appear.
Tne present tape position
Indication is displayed.
TAPE POSITION
Return to normal
screen.
Press TAPE POSITION.
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 18), and this feature is set to
on, a warning appears whenever an invalid key is pressed in TV,
OSS, or Cable mode.
Display menu.
Press ACTION.*
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
lDIOMA/LANGUE:ENGLISH
VCR’ S OUTPUT CH ; 3
SELECT:* ▼ KEY
SET : ► KEY
END :ACTION KEY
Display SET UP VCR.
1) Press AT to
select.
2) Press ► to
display.
1^1
Check list before you begin.
□ All connections are made. (See pages 4-5.)
□ VCR is plugged in.
□ TV is turned on and tuned to CH3, 4 or Video,
VCR Lock Feature
All operations are prohibited except timer
recording and tape eject. Useful for families
with small children.
Press REC in
Stop mode.
To turn ON:
In Stop mode, hold
down REC on the
VCR without a
cassette inserted for
7 seconds.
SET UP VCR
OFF
ON
AUTO SHUT-OFF
ON
SELECT:* ▼ KEY
SET : ► KEY
END :ACTION KEY
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set.
• “OFP “> remote warning will
not appear even if
invalid key is pressed.
vcn LOCK OFF
To turn OFF:
Repeat above.
• VCR Lock is canceled automatically after 24
hours if clock is set.

Panasonic Omnivision PVQ-V200 Specifications

General

Brand	Panasonic
Model	Omnivision PVQ-V200
Category	VCR
Language	English