Panasonic Omnivision PVQ-V200 User Manual

‘Important: If the remote control POWER, ACTION, PROGA/CR+, CHA/V, NUMBERED keys,
INPUT, SEARCH or ADD/DLT button does not work when pressed, press the
VCR button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON” is selected, picture is displayed even when broadcast
signal is weak or not present.
1
Display menu.
Press ACTION.*
MENU
SET UP VCR
SET UP FEATURE
SET CLOCK
[SET UP CHANNEL
IDIOMA/ LANGUE:ENGLI SH
VCR' S OUTPUT CH : 3
SELECT:A V KEY
SET : ► KEY
END ACTION KEY
Display SET UP CHANNEL
1) Press AW to
select.
2) Press ► to
display.
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
:OFF
P
CABLE/DSS BOX SET U
VCR Plus+ CH SET UP
SELECT:A T KEY
SET : ► KEY
END :ACT I ON KEY
Set ON or OFF.
1) Press AW to
select.
2) Press ► to set.
• ON -> Picture is displayed regardless of signal condition, and
may not always be clearly visible.
OFF --> Screen turns solid blue when signal is absent or weak.
• If VCR is connected to equipment which has blue back feature,
selecting ON will have no effect on the other equipment.
Return to normal
screen.
Press ACTION twice.
Auto Shut-Off Feature
When “ON” is selected, VCR shuts itself off when playback of a
blank portion of tape continues or no signal (except when LINE is
selected) is detected for over 5 minutes.
a Repeat step “a” and “b” on page 26 to
display SET UP VCR.
2 SELECT/
• SET
3 A:PUW
,* T ;STOP
b ► FF
1 ACTION
4
c
Model PV-V4520 remote is shown here.
SET UP VCR
■
REPEAT PLAY OFF
REMOTE WARNING
ON
ON
SELECT; A T KEY
SET : ► KEY
END : ACT ION KEY
_<
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set,
O
Return to normal
screen.
Press ACTION twice.
27
Special
VCR
Features

Panasonic Omnivision PVQ-V200 Specifications

General

Brand	Panasonic
Model	Omnivision PVQ-V200
Category	VCR
Language	English