Panasonic Omnivision VHS PV-C2061

4
Press CH • Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
automatically. If the setup is
completed, the following screen is
displayed.
2/7/2001WED12:00PM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END : PRESS CH UP KEY
If AUTO CLOCK SET IS
INCOMPLETE screen appears, set
the clock using MANUAL CLOCK
SET )rocedure on page 9.
AUTO CLOCK SET
I S INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
1) Press ACTION.
2) Press AY, I_ to select "CH."
POWER--
ACTION-
f
m(_l.T
I-(_0
--COMBO
SELECT/
--SET
A:CH UP
v:CH DOWN
I, :VOL UP
:VOL DOWN
MAIN MENU
CH CLOCK EXIT
SELECT !A • •
SET :ACTION
3) Press ACTION.
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
LAY:OFF
UP
BELECT:A T
SET :_
END :ACTION
4) Press &Y to select
CABLE BOX SET UP and press I_.
ARE YOU US ING I
A CABLEyEsBOX?
/
5) Press •Y to select "YES" or "NO"
and press I_.
• If you select...
• "YES" --) Step 6).
• "NO" -_ Press ACTION three times to exit.
6) Press _I,V to select the same channel as
your cable box or DSS receiver output
channel, then press I_.
• If necessary, refer to your cable box manual.
• If you are using Audio/Video jack connection
for your cable box, select and set "VIDEO
OU-r as the output channel.
7) Press ACTION
three times to exit.
11