This unit writes program data (see example
below) for about the first 10 seconds of every
recording. The information is then displayed
about 10 seconds after playback begins.
Press ACTION*
to display MAIN MENU.
2
MAIN MENU
SELECT :J. • • I_
SET :ACTION
1)Press A_', •
to select "VCR."
2) Press ACTION
to display SET
UP VCR screen.
l_Ready Check List
[-]The clock is set to correct time.
IqThe record tab is in place.
3
SET UP VCR
_EPEAT PLAY
TIMER PROGRAMMING
REMOTE WARNING
SELECT:A •
SET :_
END :ACTION
1) Press AT to
: o_F select TIME
,, STAMP.
: ON
2) Press • to set
"ON" or "OFF."
• When "OFF" is selected, the program data
is writtenon the tape, but will not be displayed.
Press ACTION twice
to return to normal screen.
<Time Stamp Example >
Normal/One
Touch Recording Timer Recording
When Clock is not set...
To Next Page
Loading...
