You may change the time stamp data (Date, Time, Channel, Category,
and Notes) as desired.
Display Time Stamp Data.
1) Insert cassette with
record tab.
2) Press PLAY.
2
Display TIME STAMP
EDIT.
Press
J PROG/VCR+
O" while the data is
dis=31aved in
olavback mode.
1
,r
1PLAY/REPEAT
[ TIh_E STAMP EDIT
DATE : 12/27/1999 _,!O,_t
TIMf_ : 12:00PM- I:00PM
CH : 08 ABC
CATEGORY : MOV)E
SELECT:,k • KEY /
SET :"_ _* KEY
END : PR0_ KEY
Change Time Stamp
Data.
_ ] t) Press AY
to select.
2) Press • or "4
to enter and
continue.
• Characters in
NOTES will change
in the following order.
_-A-- B--C .... Z-- BLANK-- -- &_]
' 9 - - - 2 --1 --0--/--!'---
3) Repeat 1) and
2) as needed.
To Make Corrections
Press "41• to move to the
incorrect entry, then press AV
to make the correction.
4
t;O*'_' I'=RITIt;G TtME STAMP Write the new data.
Press
• After the data is written, the unit
automatically goes into Stop mode.
• You cannot use POWER or REC
button while "NOW WRITING
TIME STAMP" is displayed.
-A
0000
QQ i
_Jl SELECT/
/'_ SET
A:CH UP
v:CH DOWN
k :VOL UP
4 :VOL DOWN
--2 PROG/VCR+
,i
1 PLAY
33
To Next Page
Loading...
