VCR Plus+ Channel Setup is...
necessary to program the unit with local
channel information for proper VCR Plus+
operation.
Process of Recording
]Connection ]_>, _ _ [Programm ing--]
At first, do Channel Setup Preparations below right.
1I o
Press ACTION*.
I MAIN_NU Display SET UP
-_I _-! f_,_ CHANNEL screen.
CH (_OCK_ -EXIT
S_=].LECT:A • < I_ KEY
:ACTION KEY
1) Press AV• •
to select "CH."
2) Press ACTION
to display.
3
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WF.AKSIGNAL DISPLAY:OFF
SELECT:A • KEY
SET :_ KEY
END :ACTION KEY
/ie'ectvi 'us'c"
1) PressAVto
select.
2) Press•
to display.
VCR Plus+ CH SET UP
GUIDE CH CABLE CH
-) rl_ __
02 ---
SELECT :A • KEY
ENO :ACTION KEY
Enter VCR Plus+ channels.
I_ ] 1) Pressl_to
move cursor to
right column.
2) Press AV to
change the
CABLE CH
number.
3) Press • to set.
4) Press AV to
scroll up/down
the GUIDE CH
column.
• Repeat step4 untillistiscomplete.
To Make Corrections
Press AV and • to move to error, then AV to change,
or ADD/DLT to erase number.
5i %1 "n°t'esetup
Press ACTION three times.
• Make each entry within 5 minutes or the unit will leave this mode.
• Once local channels have been programmed, they will stay in
memory, even in the case of a power failure.
20
Channel Setup Preparations
To complete step 4 left, make a local
channel list (see example below,)
You will need the following:
• A normal TV and/or Cable stations line
up and the channel numbers your receive
them on.
• A list of Guide (VCR Plus+) channel
numbers for stations you receive (see TV
Guide and selected newspapers.)
1 Make a 3-column chart. In the left
column, write all station names you receive.
2 In the middle column, write each station's
Guide (VCR Plus+) number.
3 In the right column, write the channel
number your TV receives the station on.
< EXAMPLE ONLY >
Broadcast Assigned Channel
or Cable Guide no. your TV
Station VCR Plus+) receives the
Name Channel no. station on
HBO 33 15
Nickelodeon 38 20
CBS 34 04
FOX 11
To Next Page
Loading...
