31
VCR
Strobe Multi Mode
1 Set POWER to VCR.
2 Press MENU to display the VCR
FUNCTIONS menu screen.
3 Rotate JOG KEY to select PLAYBACK
FUNCTIONS , then press JOG KEY to
display the PLAYBACK FUNCTIONS
menu screen.
4 Rotate JOG KEY to select PLAYBACK
MULTI SPEED in the PLAYBACK
FUNCTIONS menu screen.
(Menu OSD: p. 61)
5 Press JOG KEY repeatedly to set
desired speed.
• Press MENU to exit.
6 Press (PLAY) to start playback.
Press
(MULTI) at the point you want
to start capturing.
• A succession of 9 screens will be
captured, and playback will stop.
• Press (PLAY) to start playback.
Press (STOP) to stop playback.
Strobe Speeds
Strobe Speeds
FAST
NORMAL
SLOW
9 screen capture time
Every 0.3 seconds
Every 0.6 seconds
Every 1.0 seconds
• A Multi Image Playback screen cannot be
output from the DV terminal or PC
Connector terminal.
• A Multi screen will have slightly lower
image quality.
Note
In Strobe Multi Mode, you can select the
rate at which a succession of still screens
are captured from the playback picture.
3, 4, 5
JOG KEY
1POWER
6PLAY
6MULTI
Special Effect Features
EVF/LCD
2MENU
DV53.p31-32.p65 03/01/21, 16:2631
To Next Page
Loading...
