15
Installing the Accessories
Final Installed View
Handset Cradle
[Available as an Option]
Hook the projections into the square holes
on the machine.
Connect the cable into the HANDSET jack
on the machine.
Handset
[Available as an Option]
Handset Cord
[Available as an Option]
Document Return and
Recording Paper Trays
Hook the projections into the
square holes on the machine.
2
ADF Door
Installing the Lithium Battery
(This battery is used to backup the clock during power
failures, see page 166)
(1) Open the ADF Door.
(2) Install the Battery Holder, slide it to the Left until it latches and
close the ADF Door.
To Next Page
Loading...
