Panasonic PT-60LCX64-K - Disassembly;Assembly Procedures; Cabinet Section

6 DISASSEMBLY/ASSEMBLY PROCEDURES
6.1. CABINET SECTION
DISASSEMBLY METHOD OF CABINET SECTION
Cabinet section contains following removal procedures:
CABINET SECTION
BALLAST C.B.A.
REAR COVER
FRONT COVER UNIT
OPTICAL COVERLAMP COVER NETWORK C.B.A.
TUNER C.B.A.
DTV Tuner Unit
OPERATION C.B.A.
TV/TUNER UNIT
MAIN C.B.A.
REAR JACK C.B.A.
AUDIO AMP
C.B.A.
POWER C.B.A.
(LCD/PRISM UNIT, LIGHT IN POLARIZER, ETC)
THERMISTOR 2 C.B.A.
THERMISTOR 1 C.B.A.
THERMAL FUSE UNIT TOP DUCT 3 UNIT
(DISPLAY)
FAN 3 UNIT
FRONT JACK C.B.A.
COVER SWITCH C.B.A.
PROJECTION UNIT
SPEAKER
SCREEN UNIT
MIRROR
BACK PANEL
Digital Tuner Power C.B.A.
REMOVAL OF THE BALLAST C.B.A. AND THE TV/TUNER UNIT FROM THE CABINET
REMOVAL OF THE PROJECTION UNIT FROM THE CABINET
REMOVAL OF THE TUNER C.B.A., THE DTV TUNER UNIT, THE MAIN C.B.A., THE DIGITAL TUNER POWER C.B.A., THE REAR JACK
C.B.A., THE AUDIO AMP C.B.A., THE POWER C.B.A. FROM THE TV/TUNER UNIT
REMOVAL OF THE SCREEN UNIT AND THE SPEAKER FROM THE DISPLAY
REMOVAL OF THE MIRROR FROM THE BACK COVER
REMOVAL OF THE FRONT JACK C.B.A. AND THE OPERATION C.B.A. FROM THE CABINET
REMOVAL OF THE COVER SWITCH C.B.A. FROM THE CABINET
REMOVAL OF THE BALLAST HOLD PLATE, THE BALLAST SHIELD CASE TOP, THE BALLAST SHIELD CASE BOTTOM
DISASSEMBLY FLOWCHART
This flow chart indicates the disassembly steps of the cabinet parts and the P.C.Boards in order to gain access to item (s) to be
serviced. When reassembling, perform the step (s) in the reverse order. Bend, route and dress the wires as they were originally.
Note :
a. Place a cloth or some other soft material under the P.C. Boards or Unit to prevent damage.
b. When reinstalling, ensure that the connectors are connected firmly and electrical components have not been damaged.
c. Do not supply power to the unit during disassembly and reassembly.
PT-60LCX64-K
46