Panasonic PT-JX200GBE

Chapter 5 Operations — Web control function
ENGLISH - 115
Error information page
When [Error (Detail)] or [WARNING (Detail)] appears in the self-diagnosis display of the [Projector status]
screen, click it to display the error/warning details.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
Error( Detail )
1
1
1
1
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[FAILED]:
Indicates that there is a problem.
[WARNING]:
Indicates that there is a warning.
r [FAILED] items
Item Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your dealer.
[FAN]
There is a problem with the internal cooling fan or the fan drive circuit. Consult your
dealer.
[INTAKE AIR TEMPERATURE]
The intake air temperature is high. The projector may be used in an environment where
the temperature is high, such as near a heating appliance.
[OPTICS MODULE TEMPERATURE]
The temperature around the optics module inside the projector is high. The projector
may be used in an environment where the temperature is high, such as near a heating
appliance.
[LD MODULE TEMPERATURE]
The temperature of the light source is high. The projector is possibly used in an
environment where the temperature is high, such as near a heating appliance.
[LOW-TEMPERATURE]
The internal temperature of the projector or ambient temperature is low. Projection
cannot be started until the internal temperature of the projector or ambient temperature
becomes warm.
[LD STATUS]
The light source failed to turn on or off. Wait for a while until the light source cools off,
and then turn on the power.
[INTAKE AIR TEMP.SENSOR] There is a problem with the intake temperature detection sensor. Consult your dealer.
[OPTICS MODULE TEMP.SENSOR]
There is a problem with the temperature detection sensor around the optics module
inside the projector. Consult your dealer.
[LD MODULE TEMP.SENSOR] There is a problem with the temperature sensor of the light source. Consult your dealer.
[PHOSPHOR WHEEL]
There is a problem with the phosphor wheel or phosphor wheel drive circuit. Consult
your dealer.
[COLOR WHEEL] There is a problem with the color wheel or color wheel drive circuit. Consult your dealer.