Panasonic PT-VW350

Questions and Answers:

J
jamesjenningsAug 17, 2025
Why does my Panasonic PT-VW350 Projector power not turn on?
- N
  nvargasAug 17, 2025
  If your Panasonic Projector isn't powering on, several factors could be responsible. Ensure the power cord is securely connected to both the projector and the wall outlet. Verify that the wall outlet has power by testing it with another device. Check your circuit breakers to see if any have tripped. Also, check the lamp and warning indicators on the projector. Finally, make sure the lamp cover is securely installed.
S
Sarah GomezAug 19, 2025
What to do if no picture appears on my Panasonic PT-VW350?
- M
  Mark GuerraAug 19, 2025
  If your Panasonic Projector displays no picture, start by checking that the video signal input source is correctly connected to the appropriate terminal. Next, verify that the input selection setting is accurate. Ensure that the [BRIGHTNESS] isn't set to the minimum. Check the connected input source for any issues. Also, confirm that the AV MUTE function is disabled.
D
David MasonAug 22, 2025
Why does the remote control not operate my Panasonic PT-VW350 Projector?
- X
  xtylerAug 22, 2025
  If the remote control isn't working with your Panasonic Projector, begin by replacing the batteries, ensuring they are correctly installed. Check for any obstructions blocking the signal receptor on the projector. Make sure you are within the operational range of the remote. Avoid strong light shining directly onto the signal receptor. Verify that the [REMOTE CONTROLLER] setting is set to [ENABLE] in [CONTROL DEVICE SETUP]. Finally, check that the ID number setting is correct.
B
beasleybonnieAug 25, 2025
Why does the picture not display correctly on my Panasonic PT-VW350?
- M
  Mary BlackwellAug 26, 2025
  If the picture isn't displaying correctly on your Panasonic Projector, check the VCR or other signal source for any issues. Also, ensure that the input signal is compatible with the projector.
W
wmillerAug 28, 2025
Why does the menu screen not appear on my Panasonic Projector?
- J
  Jenna BakerAug 28, 2025
  If the menu screen isn't appearing on your Panasonic Projector, ensure that the on-screen display function is turned on.
J
Joe FernandezAug 30, 2025
Why do the control buttons of my Panasonic PT-VW350 not operate?
- P
  Patrick HoltAug 30, 2025
  If the control buttons on your Panasonic Projector aren't working, check if the [CONTROL PANEL] setting is set to [DISABLE] in [CONTROL DEVICE SETUP]. If so, enable [CONTROL PANEL].
T
Tracy PierceSep 2, 2025
Why is the picture fuzzy on my Panasonic PT-VW350?
- A
  Aaron RobertsonSep 2, 2025
  If the picture on your Panasonic Projector appears fuzzy, there are several potential causes. First, make sure that the lens cap has been removed. Next, adjust the lens focus to see if that sharpens the image. Ensure the projector is positioned at the correct distance from the screen. A dirty lens can also cause fuzziness, so try cleaning it. Finally, check that the projector is level and not tilted too much.
J
John OsborneSep 5, 2025
What to do if the color is pale or grayish on my Panasonic PT-VW350?
- W
  William DonovanSep 5, 2025
  If the color on your Panasonic Projector appears pale or grayish, start by checking the [COLOR] and [TINT] adjustments. Next, verify the adjustments for the input source connected to the projector. Inspect the RGB cable for any damage and replace if necessary.
M
Michael SalinasSep 7, 2025
How to fix picture from a HDMI device that does not appear or is not stable on my Panasonic PT-VW350 Projector?
- N
  Natasha WilliamsSep 7, 2025
  If the picture from an HDMI device isn't appearing or is unstable on your Panasonic Projector, first ensure the HDMI cable is securely connected. Try restarting both the projector and the connected devices. Check for unsupported signal cables.
B
Brandon WalkerSep 12, 2025
Why is there no sound from the internal speaker of my Panasonic PT-VW350 Projector?
- O
  oaguilarSep 12, 2025
  If there's no sound coming from the internal speaker of your Panasonic Projector, verify that the input terminals are correctly connected. Increase the volume level to ensure it's not set too low. Disable the AV MUTE function, as well as the regular MUTE function. Disconnect VARIABLE AUDIO OUT if plugged in, as this disables the built-in speaker. Finally, check that the audio input selection in [AUDIO SETTING] is correctly configured.

Panasonic PT-VW350 Specifications

General

Matrix size	0.59 \
Native aspect ratio	16:10
Projection distance	- m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	30 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-40 - 40 °
Keystone correction, horizontal	-30 - 30 °
HDCP	Yes
Noise level	37 dB
Noise level (economic mode)	29 dB
Dot clock scanning frequency	162 MHz
Throw ratio	1.2 - 1.9:1
Focal length range	15.3 - 24.64 mm
Aperture range (F-F)	1.6 - 2.12
RMS rated power	10 W
Number of built-in speakers	1
Lamp power	230 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	7000 h
Placement	Ceiling
Product type	Standard throw projector
Product color	White
Housing material	Plastic
Market positioning	Portable
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	310 W
Power consumption (standby)	9 W
Power consumption (typical)	290 W
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Smart TV	-
Operating altitude	0 - 1400 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %