4) Press the <ENTER> button.
f The [KEYSTONE] individual adjustment screen is displayed.
5) Press asqw to adjust the item.
Items Operation Adjustment Adjustment range
[H]
Press the w button.
Adjusts the right of
the keystone.
-60 ~ +60
Press the q button.
Adjusts the left of the
keystone.
[V]
Press the a button.
Adjusts the upper of
the keystone.
-80 ~ +80
Press the s button.
Adjusts the bottom of
the keystone.
[CORNER CORRECTION]
1) Press as to select [KEYSTONE].
2) Press the <ENTER> button.
f The [KEYSTONE] screen is displayed.
3) Press as to select [CORNER CORRECTION].
4) Press the <ENTER> button.
f The [CORNER CORRECTION] screen is displayed.
5) Press as to select the item to adjust, then press the <ENTER> button.
f The [CORNER CORRECTION] individual adjustment screen is displayed.
6) Press asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER RIGHT] [LOWER LEFT] [LOWER RIGHT]
Note
f Either [KEYSTONE] or [CORNER CORRECTION] setting value is valid. When [KEYSTONE] or [CORNER CORRECTION]
adjustment is nished, you adjust the other one, the adjusted value will be reset.
f Press the <KEYSTONE> button on the remote control when the [KEYSTONE] or [CORNER CORRECTION] screen is
displaying, it will switch to the other adjustment screen.
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next
corner can also be displayed by pressing the <ENTER> button.
f Correcting up to ±40° for the tilt in the vertical direction and ±30° for the tilt in the horizontal are available for adjustments
with [KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install the
projector so that the correction will be as small as possible.
f Screen size will also change when [KEYSTONE] is used to perform various adjustments.
f Aspect ratio of the image size may shift depending on the correction.
ENGLISH - 57
Chapter 4 Settings - [POSITION] menu
To Next Page
Loading...
