To Next PageTo Next Page
Need help?Do you have a question about the Panasonic PT-VW345NZ and is the answer not in the manual?
General| Native aspect ratio | 16:9 |
|---|---|
| Projection distance | - m |
| Projection technology | LCD |
| Supported aspect ratios | - |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | 40 ° |
| Vertical synchronization (min) | 50 kHz |
| Keystone correction, horizontal | 30 ° |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 10 kHz |
| Focus | Manual |
| Zoom capability | Yes |
| Focal length range | 15.3 - 24.64 mm |
| Aperture range (F-F) | 1.6 - 2.12 |
| Lamp type | UHM |
| Lamp power | 230 W |
| Light source type | Lamp |
| Service life of light source | - h |
| Full HD | No |
| Audio (L/R) in | 3 |
| USB connector type | USB Type-A, USB Type-B |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Noise level | 35 dB |
| RMS rated power | 10 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 5 W |
| Power consumption (typical) | 300 W |
| Power consumption (PowerSave) | 0.4 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Cables included | AC, VGA |
Weight and Dimensions| Depth | 279.4 mm |
|---|---|
| Width | 98 mm |
| Height | 352 mm |
| Weight | 3400 g |
Essential safety warnings, cautions, and guidelines for operating the projector.
Details product compliance, regulations, and EU importer information.
Covers safe handling, installation, usage, wireless, and environmental considerations.
Details projector parts, accessories, CD-ROM contents, and initial setup.
Instructions for projector installation modes, mounting, and screen adjustments.
Guides on connecting AV equipment, computers, and audio devices.
Procedures for connecting power, status indicators, and power management.
Steps for selecting input signals and adjusting image quality.
Explains functions of remote control buttons like AUTO SETUP, ZOOM, FREEZE, etc.
How to navigate menus, reset settings, and overview of main/sub menus.
Configuration for picture modes, contrast, keystone, aspect ratio, and position.
Settings for language, on-screen display, startup logo, and projector initialization.
Details on security settings, wired/wireless LAN, network control, and USB.
Explains projector indicator lights and provides solutions for common problems.
Guides for replacing air filter, lamp unit, and attaching the lens cap.
Details on PJLink protocol, control commands, serial terminal, and signal compatibility.
Technical specifications, model details, and physical dimensions of the projector.
Ceiling mount safeguards, glossary of terms, and software licensing information.
Guidelines for environmentally responsible disposal of the product and batteries.
