Panasonic PT-VW345NZ

About your projector
Remote control
1
2
3
5
6
7
8
9
4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
1 Remote control signal emitters
2 <b> button
Turn the projector on.
3 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
projecting the image. In addition, it acts as <CANCEL>
button when using the MEMORY VIEWER function.
(
Æ
page 47)
4 <MENU> button
Open or close the On-Screen Menu. (
Æ
page 54)
5 <ENTER> button/asq(VOL -) w(VOL+) buttons
Navigate the menu display.
Adjust the volume.
6 <DEFAULT> button
Resets the content of the sub-menu to the factory
default. (
Æ
page 55)
7 <COMPUTER 2> button
Switches the COMPUTER2 signal to project.
8 <COMPUTER 1> button
Switches the COMPUTER1 signal to project.
9 <Miracast> button
Switches the Miracast signal to project. (
Æ
page 49)
10 <MEMORY VIEWER> button
Switches the MEMORY VIEWER signal to project.
(
Æ
page 49)
11 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
(
Æ
page 29)
12 <ID SET> button
Sets the ID number of the remote control to use for a
system using multiple projectors. (
Æ
page 29)
13 <D.ZOOM +/-> buttons
Zoom in and out the images. (
Æ
page 50)
14 <PAGE UP/PAGE DOWN> buttons
You can page up or page down les such as PowerPoint
through "Wireless Manager ME6.0". (
Æ
page 49)
15 <MUTE> button
Used to mute the audio. (
Æ
page 52)
16 <P IN P> button (Only for PT-VW345NZ)
Operate the P IN P function. (
Æ
page 51)
17 <ON/OFF> switch
When using the remote control, set this switch to “ON”. Set
it to “OFF” to avoid misoperation when it is not in use.
18 <v> button
Turn the projector off.
19 Remote control indicator
Flashes if any button in the remote control is pressed.
20 <KEYSTONE> button
Correct keystone distortion. (
Æ
page 47)
21 <RETURN> button
Return to the previous menu or cancel the setting.
22 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
23 <HDMI> button
Switches the HDMI signal to project.
24 <Panasonic APP> button
Switches the Panasonic APPLICATION signal to project.
25 <VIDEO/S-VIDEO> button
Switches the VIDEO signal or S-VIDEO signal to project.
26 <FREEZE> button
Pauses the projected image and mute the audio
temporarily. (
Æ
page 50)
27 Number buttons
Act as number buttons. Use these buttons when setting
the remote control codes or entering the password.
28 <P-TIMER> button
Operate the P-TIMER function. (
Æ
page 52)
29 <AV MUTE> button
Used to turn off the audio and video temporarily.
(
Æ
page 51)
26

This jack is not used for these
projector models.
29
ENGLISH - 25
Chapter 1 Preparation - About your projector