Connecting with Wired LAN
Projector settings
1) Use the LAN cable (Straight) to connect the projector with computer.
2) Turn on the projector.
3) Press the <MENU> button to display the [NETWORK/USB] menu, and then select [WIRED LAN], and
press <ENTER> button.
4) Set the detailed setup of [WIRED LAN].
For details, see “WIRED LAN” (Æpage 85).
Note
f Please conrm with your network administrator before you connect to an existing network.
f The following settings are set before the projector leaves the factory.
[DHCP]
OFF
[IP ADDRESS]
192.16 8.10.10 0
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.16 8.10.1
[DNS1]/[DNS2]
NONE
Computer operation
Connection can be made with wired LAN. However, conrm to your system administrator on network settings before chang-
ing any settings.
1) Turn on the computer.
2) Make the network setting according to your system administrator.
f If the projector settings are the default settings (Æpage 85), the computer can be used with the following network
settings.
[IP ADDRESS]
192.16 8.10.101
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.16 8.10.1
Connecting with Wireless LAN
Projector settings
1) Turn on the projector.
2) Press the <MENU> button to display the [NETWORK/USB] menu, and then select [M-DIRECT], or
[USER1] ~ [USER3] for [WIRELESS LAN].
3) According to the network number selected in step 2, set the detailed setup of [WIRELESS DETAILED
SETUP].
f For details, see “WIRELESS DETAILED SETUP” (Æpage 86-88).
Note
f Wireless LAN and wired LAN cannot be used in the same segment.
f When multiple devices are connected, a unique IP ADDRESS must be allocated to each device.
f SSID has to be entered in alphanumeric letters.
f You cannot set “any” or “ANY” for SSID.
f The projector settings are not required when Miracast is connected. For details about Miracast, please refer to
page 113.
f The following settings are set before the projector leaves the factory.
[M-DIRECT]
[IP ADDRESS]
192.16 8.12.100
[SUBNET MASK]
255.255.255.0
[SSID]
M-DIRECT + The last 4 digits of the projector ID
[CHANNEL]
1
[KEY]
The same string as the SSID
ENGLISH
-
93
Chapter 4 Settings - [NETWORK/USB] menu
To Next Page
Loading...
