Panasonic PT-VW350

[RGB/YPBPR]/[RGB/YCBCR]
Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YCBCR] or [YPBPR]
in accordance with the input signal.
1) Press as to select [RGB/YPBPR] or [RGB/YCBCR].
2) Press qw or the <ENTER> button.
f The [RGB/YPBPR] or [RGB/YCBCR] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO] The sync signal automatically selects the signal [RGB]/ [YPBPR]/[YCBCR].
[RGB] Select it for RGB signal input.
[YP
BPR] Select it for YPBPR signal input.
[YC
BCR] Select it for YCBCR signal input.
When the <COMPUTER 1 IN> terminal is selected
f For 525i (480i), 625i (576i), 525p (480p) and 625p (576p) input
Select [AUTO], [RGB] or [YCBCR].
f For other movie-based signal input
Select [AUTO], [RGB] or [YPBPR].
When the <HDMI IN > terminal is selected
f For 525p (480p) and 625p (576p) input
Select [AUTO], [RGB] or [YCBCR].
f For other movie-based signal input
Select [AUTO], [RGB] or [YPBPR].
Note
f Refer to “List of compatible signals” (x page 112) for the signal details.
f The signal selection may not function properly depending on connected devices.
ENGLISH - 55
Chapter 4 Settings - [PICTURE] menu