[STATUS]
Displays the current network status.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
f The [STATUS] screen is displayed.
[DHCP] Displays the usage state of the DHCP server.
[IP ADDRESS] Displays the IP address.
[SUBNET MASK] Displays the subnet mask.
[DEFAULT GATEWAY] Displays the default gateway.
[DNS1] Displays the address of the primary DNS server.
[DNS2] Displays the address of the secondary DNS server.
[MAC ADDRESS] Displays the MAC address.
[INITIALIZE]
This function is used to return various setting values of [NETWORK] to the factory default value.
1) Press as to select [INITIALIZE].
2) Press the <ENTER> button.
f The [INITIALIZE] screen is displayed.
3) Press qw to select [OK] and then press the <ENTER> button.
Network connections
The projector has a network function, and the following operations are available from the computer using the web browser
control.
f Setting and adjustment of the projector.
f Display of the projector status.
f Transmission of an E-mail message when there is a problem with the projector.
The projector supports "Crestron Connected™", and the following application software of Crestron Electronics, Inc. can be
used.
f RoomView Express
f Fusion RV
f RoomView Server Edition
Note
f "Crestron Connected™" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple
system devices connected via the network, from a computer. This projector supports "Crestron Connected™".
f For details of "Crestron Connected™", refer to the Crestron Electronics, Inc. website. (Provided only in English.)
http://www.crestron.com/
For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website. (Provided only in English.)
http://www.crestron.com/getroomview
Computer that can be used
In order to use the Web control function, a Web browser is required. Conrm that the Web browser can be used beforehand.
OS Compatible web browser
Windows Internet Explorer 8.0 / 9.0 / 10.0 / 11.0
Mac OS Safari 6.0 / 7.0 / 8.0
Note
f Communication with an E-mail server is required to use the E-mail function. Conrm that the E-mail can be used
beforehand.
ENGLISH - 81
Chapter 4 Settings - [NETWORK] menu
To Next Page
Loading...
