Panasonic PV-A208 - Camera Recording; Simple Recording

Camera
Recording
Simple
Recording
WARNING:
•
Do
not leave the
Camcorder
with
the
EVF
aimed directly
at the
sun
as this
may
cause
damage
to the
internal parts of the
EVF.
When your
Camcorder
is
aimed
at
excessively
bright objects, or
bright lights,
a
vertical
bar
may
appear
in the
picture.
This
is
a
normal
characteristic
of
the
CCD
pick-up device.
Try
to
avoid
this
when
possible.
Before
you
begin...
*
Connect
the Camcorder to a
power source.
*
Insert
a
cassette with
record
tab (see page 12).
Set the
POWER
switch
to
CAMERA.
The
built-in Lens Cover opens.
EVF
•
Make
sure
the
POWER switch
is
fully rotated to
the
CAMERA
position.
Record/Pause
mode.
With the
Viewfinder
Eye
Cup
against your eye,
adjust the
Vision
Adjustment
Control to
your
eye-
sight.
Slide
the TAPE SPEED
Selector
to
SP or
SLP (refer to page
12).
Press
RECORD/PAUSE
to
start
recording.
The
Tally
Lamp
and REC Indicator
are
lit during
recording.
RECORD
Press
the
RECORD/PAUSE
again
Iq
pause
the recording.
Set
the Power switch to
OFF
after
recording is
finished.
•
To
remove the
cassette
In Record/Pause
mode,
slide
the
TAPE
EJECT
switch (refer to
page
12).
22