17
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Settings are made automatically.
When complete, this screen appears.
If “AUTO CLOCK SET IS INCOMPLETE” appears,
manually set clock (below).
3
If Auto Clock Set was incomplete.
Press ACTION* on remote to display
CLOCK screen.
Press
to select the month and SET to set.
In the same manner, select and set the date,
year, time, and DST (Daylight Saving Time).
Press ACTION to start clock and exit.
Manual Clock Set
1
2
3
VCR
ACTION
SET
SELECT
EJECT
STOP/EJECT
Initial Setup
To Next Page
Loading...
