Panasonic PV-D4742 - Digital Audio Setup; Connecting to Dolby Digital;dts Decoders

1. Remove the DVD Unit and the DVD Decoder C.B.A.
Note:
Remove the original Connector Cable (IDE) from the DVD Unit.
(The original Connector Cable (IDE) is not used in this position.)
2. Connect the Connector Cable (Power) and the Connector Cable
(IDE) to the DVD Unit from the DVD Decoder C.B.A.
3. Connect the 3 Extension Cables as follows:
- With Extension Cable (LSUA0034): P8001 on the DVD
Decoder C.B.A. to P1501 on the Power Supply C.B.A.
- With Extension Cable (LSUA0034): P8002 on the DVD
Decoder C.B.A. to P3001 on the Main C.B.A.
- With Extension Cable (LSUA0034): P8003 on the DVD
Decoder C.B.A. to P6002 on the Main C.B.A.
4. Place the DVD Unit and DVD Decoder C.B.A. as shown.
Fig. 7-3-2
15