2. Input the saved file name, and then press "Enter" key. ID Number
will be written automatically.
b When the original ID information can not be read because of destruction of EEPROM etc.:
1. Select "3. Read (Save)/Write All EEPROM data." in Main menu,
and then press "Enter" key.
2. Select "8. Write ID from stored file." and then press "Enter" key.
ID Number will be written automatically.
5.1.10. HOW TO USE THE DVC HEAD CLEANING TAPE/ VFK1451
Please use the cleaning tape as described below.
Fig. 7
5.1.11. HOW TO REPLACE THE LAMP (VLLW0023) OF ENHANCEMENT LIGHT
UNIT
Fig. 8
19
To Next Page
Loading...
