Panasonic PV-M1327

2-4
PK2
PK1
PK3
P1002
Main C.B.A.
Locking Tabs (B)
A/C Cord
7 TV Main C.B.A.
TV Main C.B.A.
Disassembly Procedure
1. Disconnect Connector P1002 on the Main C.B.A.
2. Disconnect 3 Connectors PK1, PK2, and PK3 on the TV
Main C.B.A.
Note :
When disconnecting or connecting 3 Connectors PK1,
PK2, and PK3, take extreme care not to break them.
3. Remove the TV Main C.B.A. by releasing 2 Locking Tabs (B)
and A/C Cord from the frame.
Fig. D8
Clampers (B)
Cassette Up Ass'y
Screws (B)
Clampers (B)
Clamper
Clamper
6 Top Shield
Plate Ass'y
Top Shield Plate Ass'y
Disassembly Procedure
1. Release the 2 Clampers (B) on the Top Shield Plate Ass'y
and remove the leads from the clampers.
2. Remove 3 Screws (B). Then, remove the Top Shield Plate
Ass'y.
Fig. D7-1
Reassembly Notes
1. When installing the Top Shield Plate Ass'y, make sure the
2 Clampers (B) on the Cassette Up Ass'y are turned in the
direction shown.
If not, the Top Shield Plate Ass'y cannot be installed.
Fig. D7-2