37
Special Features
Self Timer Recording
1Press or to select SELF TIMER
and press
or to select ON.
This puts the camera in self-timer
mode.
• After ON is selected and MENU is
pressed,
mark will appear on the
LCD Viewfinder (see page 10).
2Press MENU to exit.
3Press SHTR.
• The Self-Timer Indicator lights up.
The indicator starts flashing rapidly
after about 8 seconds and the image
is captured about 2 seconds later.
• The Self-Timer setting returns to
OFF mode each time an image is
captured. Repeat these steps each
time Self-Timer is used.
The Self-Timer allows you to capture an
image about 10 seconds after pressing the
shutter.
Set the POWER Switch to REC or
MANUAL REC. (See pages 19~20.)
Before you begin
<REC Mode> <MANUAL REC Mode>
<MANUAL REC MENU 1/3>
AUDIO
SELF TIMER
BRIGHTNESS
OSD
IRIS
SEL : SET :
EXIT : MENU
ON
ON
ON
<REC MENU 1/2>
AUDIO
SELF TIMER
BRIGHTNESS
OSD
CLOCK SET
SEL : SET :
EXIT : MENU
ON
ON
ON
SEP 10 2000
10 : 00 AM
10 F
REC
OFF
PLAY
PC
MANUAL
REC
VOL
+
VOL
-
-
+
2
3
1
Self-Timer
Indicator
SD4090.p34-44.p65 99/11/11, 16:4037
To Next Page
Loading...
