Panasonic PV-V4021 - Tape Operation: Special Features; Repeat Play; Zero Search; Tape Position Display

ape
Operation
Special VCR Features
Repeat Play
Set
to
playback
a recording over and
over.
1
Press
ACTION*
to
display menu.
Press
AT
to select
REPEAT
PLAY
and
press to
set
ON
or OFF.
•
Play repeats
at
tape
end or if unrecorded
portion
over
30
sec.
is
detected.
Press ACTION
to
return
to
normal screen.
Zero
Search
To
quickly return
to a
specified tape
location.
IPrass
DISPLAY
during play
to display Counter.
Press RESET
COUNTER at
desired position
to
reset
to
"0:00:00"
^
Continue
to
record,
playback, etc.
Press
Stop.
Press CIWZERO
In Stop mode
to start
ZERO
SEARCH.
•
Unit will
go
into FF
or
REW
mode
and
stop at the
last point
the
Counter
was set
to 0:00:00.
If a blank portion
exists on the
tape, and depending on
the
position
of the V nnark,
the
V mark display
position may
not
be
accurate.
Tape Position
Display
Feature
To
find out the
present tape position.
Tape
position cannot
be
detected for
VHS-C
Cassette
type
and tapes less than 60
minutes
In length.
1
Press TAPE
POSITION
to detect tape position.
DETECTING TAPE POSfTIONj
begUT
•
"DETECTING TAPE
POSITION"
only
appears the
first
time
a
cassette is
inserted
and
it
takes several
seconds
for
correct
indication
to
appear.
•
The present tape
position indication is
displayed.
Press
TAPE
POSITION
to return
to
normal screen.
Remote Warning ON/OFF
Feature
If Multi-brand feature is
used (page
16),
and this
feature
is
sot to on,
a
warning
appears whenever
an
invalid
key
is pressed in TV mode.
1
ACTION
to display menu.
REPEAT PLAY
AUTO SHUT
-OFF
IDIOWAAJUtlGue
:
ENOLISH
vara
output
ch
Press
AT
to
select
REMOTE
WARNING and press
lo
set
ON
or OFF.
•
If "OFF,"
remote
warning will not
appear if invalid
key
Is
pressed.
3
Press
ACTION
to
retum to
normal screen.
22
For
assistance, please call : 1--800-211-PANA(7262)
or send e-mati
to : consumerproducts@panasonic.com