Note:
1. After replacing the Cylinder Unit, press COUNTER RESET button
on remote in this mode. Only Total elapsed "Cylinder rotation"
time (in hours) will be cleared to 0.
2. To release from Usage Screen Mode, press any operation button
on unit or insert a cassette tape in this mode. The unit will return
to normal operation mode.
5.1.3. SERVICE POSITION
5.1.3.1. Service Position
CAUTION:
HOT CIRCUIT (Primary circuit) exists on the TV/VCR Main C.B.A.
Use extreme care to prevent accidental shock when servicing.
5.1.3.2. Service Position (1)
Fig. 2-1
5.1.3.3. Service Position (2)
Fig. 2-2
11
To Next Page
Loading...
