EasyManua.ls Logo

Panasonic Quasar Omnivision PVQ-1311

Panasonic Quasar Omnivision PVQ-1311
247 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Tape Operation
Program End Search
Locates end point of recording for continuity.
Press SEARCH twice in Playback or
Stop mode to display PROGRAM END
SEARCH screen .
1
SEARCH START
:
FF
EX
I
T
:
SEARCH
PROGRAM
END
SEARCH
Press FF
to start search.
Example of Program End Search operation.
Fig.1
Fig.2
Fig.3
If search exceeds a few seconds in BLANK area.
PLAYBACK DIRECTION
Program 1
Program 2 or BLANK
INDEX
Program 2
BLANK
INDEX
BLANK
Program 1
Program 2
BLANK
Program 1
INDEX
Press SEARCH button
Press SEARCH button
FF
FF
Press SEARCH button
FF
End Point
2
End Point
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
Press SEARCH button
If Program End Search is started very close
to an index mark, that mark may be
skipped over.
To cancel, press PLAY or STOP.
End Point
Notes
1
Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen.
Index Search
Go directly to the desired recording.
Make each entry within 10 seconds, or the
Index Search mode will be canceled.
If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
Notes
2
Press
number keys
to select the
recording number.
To calculate
number, see below.
3
Press FF or REW
to start search.
Play begins at search
end. To search
forward or back 1
index, press FF or
REW while screen
left in displayed (10
seconds).
I
N
D
EX
S
EARCH 3
NOTE: indicates start points of each recording.
61572 34
To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
17534 62
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
ENTER
I
NDEX
NUMBER
:
1
US
I
NG 1
-
9
KEYS
FOR
W
ARD
SEARCH
:
FF
REVERSE SEARCH
:
REW
NEXT
:
SEARCH
EX
I
T
:
STOP
I
NDEX SEARCH
I
N
D
EX
S
EARCH
FOR
W
ARD
SEARCH
:
FF
REVERSE SEARCH
:
REW
I
NDEX SEARCH
C2061- P30-33 Tape OP 00.12.14, 5:33 PM30

Related product manuals