Panasonic Quasar Omnivision PVQ-1311

31
Advanced Operation
■ Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
➔ Power turns off
• This feature is canceled if any button is
pressed during above mode.
■ Auto Playback
Insert a tape in Power off mode
➔ Power turns on
• Playback begins if tape has no record tab.
■ Auto Rewind
Tape reaches its end
➔ Rewind, ➔ Stop
■ Playback Auto Eject
(Repeat Play is “OFF”)
Tape with no record tab reaches its end
➔ Rewind, ➔ Stop, ➔ Eject
Auto Operation Functions
Tape Position Display
To find out present tape position and amount of
tape remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and
some other tapes.
Press TAPE POSITION
to detect current tape position.
1
VIDEO IN
VIDEO IN
AUDIO IN
AUDIO IN
POWERPOWER VOLVOL CHCH STOP/EJECT
STOP/EJECT
REW/
REW/
PLAY/REPEAT
PLAY/REPEAT
FF/
FF/
REC
REC
TIMER/FM
TIMER/FM
ACTION
ACTION
REC
REC
ON TIMER
ON TIMER
PROG TIMER
PROG TIMER
REW FF
<Model PV-C2061 unit shown>
• This function cannot display exact amount of
tape remaining for tapes over 120 minutes.
• “DETECTING TAPE
POSITION” is displayed only
when a cassette is first inserted
and it takes several seconds for
correct tape position to appear.
DETECT I NG TAPE POS I T I ON
BEG I N END
SLP
R 120 MIN.
•The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
•Tape remaining time display
may not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
2
*
Important: if a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
conds in BLANK area.
Note
C2061- P30-33 Tape OP 00.12.14, 5:33 PM31