6.2.9.1. Reassembly Notes
1. Alignment of T Loading Arm Unit and S Loading Arm Unit
A. Install the S Loading Arm Unit onto the chassis.
B. Install the T Loading Arm Unit so that the hole on T Loading
Arm Unit is aligned with the hole on S Loading Arm Unit.
C. Confirm that the holes on the S & T Loading Arm Unit are
Through Holes with hole on chassis.
Fig. J7-2
6.2.10. T Brake Unit, Tension Control Arm Unit, T Reel Table, S Reel Table, and
Tension Arm Unit
Fig. J8-1
43
To Next Page
Loading...
