Panasonic Quasar Omnivision PVQ-1311 - Page 60

7.3.3. STEREO/SAP SEPARATION ADJUSTMENT (FOR MODEL WITH TV STEREO/
Hi-Fi AUDIO)
Purpose:
To separate the L and R Channels of Stereo Signal.
Symptom of Misadjustment:
The L and R Channels of Stereo Signal will not be separated
properly resulting in no stereophonic effect.
Test Point :
TP9001 (Audio C.B.A.)
Adjustment :
R9001, R9008 (Audio C.B.A.)
Specification :
minimum level
INPUT :
Antenna Input Terminal
MTS (ONLY L CH)
300 Hz±5 Hz, 3 kHz±5 Hz
14 % or 7 % Modulating
Mode :
STEREO audio (TV)
Equipment :
Oscilloscope,
60