For Selecting Control functions and setting Default value, refer to "
HOW TO ENTER EVR ADJUSTMENT MODE" and "HOW TO ENTER
EVR PG SHIFTER ADJUSTMENT MODE" in ELECTRICAL
ADJUSTMENT procedures.
Fig. 4-2
3. Press and hold STOP, PLAY, and VOL DOWN buttons on the unit
together over 5 seconds again or press the POWER button OFF to
release EVR Adjustment Mode.
The Default value will be written to Memory IC (IC6004).
4. Perform all EVR Adjustments. (Refer to "EVR (Electronic Variable
Register) ADJUSTMENT WITH THE REMOTE CONTROL" in
ELECTRICAL ADJUSTMENT procedures.)
5.1.7. METHOD FOR LOADING/UNLOADING OF MECHANISM
5.1.7.1. (Manual Method)
Turn the Loading Gear clockwise (for loading) or counterclockwise (for unloading) using
needlenose pliers etc.
Note:
13
To Next Page
Loading...
