6.1.2.1. Notes in chart
1. Installation of VCR Unit
CAUTION:
Opener Lever may be damaged when VCR Unit is installed, with
Cassette Door-Lid and Opener Lever of Cassette Up Ass'y set
incorrectly.
A. When installing the VCR Unit, swing the Cassette Door-Lid all
the way open until the Cassette Door tab clears the Opener
Lever.
B. Make sure that all guide tabs are aligned properly.
Then, press the VCR Unit straight in.
Fig. D6
2. Removal of CRT Unit
Place the Unit face down on a soft cloth before removing the CRT
Unit.
Installation of CRT Unit (Model: A, B, C, D, E, F, G)
When installing Degaussing Coil, place the Degaussing Coil
correct position.
Fig. D7
26
To Next Page
Loading...
