5.1.8. HOW TO REMOVE A JAMMED TAPE
CAUTION:
Wiper Arm Unit may be damaged or its spring may be out of place when the jammed tape is
removed by force.
Remove a jammed tape as follows:
5.1.8.1. Manual Method
When a tape jam is encountered, check the tape loading condition and use the following
procedure to remove a tape jam.
Fig. 6-1
5.1.8.1.1. Method -1:
1. Move the Pinch Roller Unit out by unhooking the Pin of Pinch Arm
Unit so that the Pinch Roller is separated from the Capstan Rotor
Unit shaft.
Fig. 6-2
15
To Next Page
Loading...
