Service Manual
Colour Television
TX-21AP2D
TX-21AP2F
TX-21AP2P
TX-21AP2D/B
TX-21AP2P/B
GP3L Chassis
SPECIFICATIONS
Power Source: 220-240V a.c., 50Hz
Power Consumption: 50W
Stand-by Power
Consumption: 0,9W
Aerial Impedance: 75Ω unbalanced, Coaxial Type
Receiving System: PAL-I, B/G, D/K,
SECAM B/G, D/K, L/L’
M.NTSC (AV only),
PAL 525/60 (AV only)
NTSC (AV only)
Receiving Channels:
VHF E2-E12 VHF H1-H2 (ITALY)
VHF A-H (ITALY) VHF R1-R2
VHF R3-R5 VHF R6-R12
UHF E21-E69 CATV (S01-S05)
CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Intermediate Frequency:
Video/Audio
Video 38,9MHz, 33,9MHz
Sound 33,4MHz (B/G), 33,16MHz (A2)
33,05MHz (NICAM B/G,D/K,L)
32,4MHz (D/K),32,66MHz (CZ STEREO)
40,4MHz (L’), 39,75MHz (L’NICAM)
Colour 34,47MHz (PAL)
34,5MHz, 34,65MHz (SECAM)
38,3MHz, 38,15MHz (SECAM L’)
Terminals:
AV1 IN Video (21 pin) 1V p-p 75Ω
Audio (21 pin) 500mV rms 10kΩ
RGB (21 pin) 0,7V p-p 75Ω
AV1 OUT Video (21 pin) 1V p-p 75Ω
Audio (21 pin) 500mV rms 1kΩ
AV2 FRONT Audio (RCAx2) 500mV rms 10kΩ
Video (RCAx1) 1V p-p 75Ω
High Voltage: 26,0kV ± 1kV
Picture Tube: A51ERF135X71 51cm
Audio Output: 2x5W RMS, 2x10W MPO,
8Ω impedance
Headphones: 8Ω Impedance
Accessories
supplied : Remote Control
2 x R6 (UM3) Batteries
Dimensions:
Height: 471mm
Width: 524mm
Depth: 472mm
Net weight: 22kg
Specifications are subject to change without notice.
Weights and dimensions shown are approximate.
ORDER No. PCZ0409020C2
To Next Page
Need help?
General