62
MIDI Sequencer (Digital Performer) Setup
To receive MTC from the DA-98 through the MIDI Timepiece A/V , set the Sync Port to [Modem] in
the Receive Sync area in the Basic menu, and set the [Type of Sync] to [MTC, DTL or DTLe].
Then, set the [Slave to External Sync] to [ON] in the Basic menu and press the [Play] button on
the control panel. When MTC is received from the MIDI Timepiece A/V, Digital Performer time-
code begins to run.
To Next Page
Loading...
