Panasonic RAMSA WR-S208 - Technical Specifications Summary

TECHNICAL SPECIFICATIONS
Power Supply:
Power Consurr~tion:
Frec~ency Response:
THD:
Equivalent Input Noise:
Maximum Gain:
Crosstalk:
CMRR:
Phar~om POI"er:
I
nput Chann.,. Equalizer:
Maximum Output _eve:
Peak Meters:
Phones:
I nput Faders:
Main Outpul '=ader:
Dimensions:
Weight:
1 20V AC, 60 Hz
WR-S208: 4C W
WR-S212: 44W
WR-S216: 48 W
Mic / Line/Phono/Tape/ Aux Input :
20Hzt020kHz , +0.5to-1 . 0dB
Transformer Output:
40 Hz to 20 kHz, +0.5 to -' .0 dB
0.03% (at 50 Hz to 15 kHz, · 18 dB, 64 dO Gain)
0. 1% (at 20 Hz to 20 kHz, + 18 dB, 64 dB Gain)
-
128 d:J Max 1-132 dB Typical)
Mic: 84 dB
_ ine: !:/ dB
60 dB at 1 kHz
80 dB "Typical at ' krlz
+ 48V OC Regulated
Mono I:-.puts
High: ± 1 5 dB (± 12 dB atl 0 kH z) Shelving type
Mid: ± - ::i dB (400 . :z to 6.3 kHz) Peaking type
Low: ± 1 5 ad (± 12 dB at 100 Hz) Shelv··-g type
Stereo In puts
High: ± ~ S d:J (± 12 dB at ' ,0 kHz) ShelVing type
Low: ± 1 5 dB I ± 1 2 dB at 100 Hz) Shelving type
+ 20 dB
12-point '_ED bar-graph meter
WR-S208: 3 meters
WR-S 21 2/V1.19 -521 6: 4 Meters
/50 mW : 250 mW/I-,i-Z
60 mm carbon fader
60 mIT carbon fader
WR-S208 : 16-15 / 1S"(W) x 5-7 / S"(H) x 20-3 / 4"10)
[4JO(W) x 150(1,) x 528(0) m m)
WR-S212: 25-5/8"(W) x 5-7/8"IH) x 20-3/4"(0)
[6S0.5(W) x 150(: ) x 528(0) mm)
WR-S2 6: 30-9/' 6"(W) x 5-7/8"(H) x 20-3/4"(0)
[776.5(W) x 1 50(H) x 52810) lim]
WR-S20B: Approx. 33 Ibs (15 kg)
WR-S
212: Approx. 40 ,js (18 kg)
WR-S
216: Approx. 47 js (21.5 kg)
. 22 -