Panasonic RC-6099 - Maintenance and Service; When to Seek Professional Service

Placement
1. Ventilation -- The unit should be 5. Surface -- Place the unit on a flat, leve!
situated so that its location or position Surface.
does not interfere with its proper 6. Carts and Stands -- The unit should be
ventilation. Allow 10 cm (4°) clearance used only with a cart or stand that is
from the rear of the unit. recommended by the manufacturer.
- Foreign Material -- Care should be The unit and cart combination should
taken so that objects do not fall into and be moved with care. Quick stops,
liquids are not spilled into the unit. Do excessive force, and
not subject this unit to excessive uneven Surfaces may
smoke, dust, mechanical vibration, or cause the unit and cart
shock. combination to overturn.
- Magnetism ~ The unit should be > Wall or Ceiling Mounting -- The unit
situated away from equipment or de-
vices that generate strong magnetism.
should not be mounted to a wall or
ceiling, unless specified in this oper-
4. Stacking -- Do not place heavy objects
i
ing
instructions.
on
top
of
the
unit.
ating
instructions
Maintenance
Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol
or benzine.
Clean the cabinet, panel and controls with
a soft cloth lightly moistened with mild
detergent solution.
Service
(d) The unit does not appear to operate
normally or exhibits a marked
change in performance; or
(e) The unit has been dropped, or the
enclosure damaged.
2. Servicing -- The user should not at-
been spilled into the unit; or tempt to service the unit beyond that
(c) The unit has been exposed to rain; described in the operating instructions.
or All other servicing should be referred to
qualified service personnel.
1. Damage Requiring Service -- The unit
should be serviced by qualified service
personne! when:
(a) The AC power supply cord or the
plug has been damaged; or
(b} Objects have fallen or liquid has