Panasonic RC-6099 - Sure Time Battery Back-Up; Battery Installation Procedure; Battery Replacement Guide

Sure Time Battery Back-Up
The back-up battery will keep the clock
and alarm time during a power interruption.
When power is resumed, the digits of the
clock will illuminate and will show the time.
Battery installation
1
C] @®6F22/6LR61
© 006P 9V
1 Connect a 9-Volt battery
(not included) to the snaps,
observing correct polarity.
A battery installed with incorrect
polarity may leak and damage the
unit.
When replacing the battery
Unplug the AC power cord from the AC
outlet. After several seconds, plug it back
into the outlet. if the digits flash con-
tinuously, replace the battery with a new
one.
Replace the battery with a new one after
one year of use (most batteries have a
shelf life of approximately one year).
The alarm “memory” is not affected by a
power interruption—so there is no need to
reset the alarm.
2 Place the battery in the
compartment by inserting it
in the direction of the arrow
©, while pushing the bat-
tery holder in the direction
of the arrow ©.
Note no battery cover is used.
If an extended power failure or interruption
occurs, replace the battery with a new one.