Panasonic RF-3100

POWER
SUPPLY
I Battery
Operation:
1)
Open
the Battery
Compartment Cover,
as shown in the figure.
2) lnserl
8
"D"
size
(Panasonic
UM-1 or equivalent)
batteries into
the
Battery Compartment,
making
sure that
the batteries
are
installed
in
the specified numerical
order,
and that the
proper
polarities
(@
and
Q)
are maintained.
3) Replace
the Battery
Compartment
Cover.
Note:
Be
sure to
set the
Power
Switch to
"OFF",
when
turning the set off.
Unplugging
the
AC Power
Cord from
the AC outlet automatically
switches
from
AC
to battery
operation,
but does
not
turn the unit of
f .
oWhen
removing
the
batteries,
start by first lifting
up the
@
side
ol
the
"No.
7"
battery.
oBattery
Condition:
1)
Setthe Power
Switch to
"ON".
2)
The Power
lndicator
will then
show
the
battery
condition.
k-
Strong
--+p-
Weak
--------r3- Dead ------N
FishtR"E
I AG PowerOperation
1)
Open the AC
Power
Cord Compartment,
as shown
in
the
figure.
2)
Extend
the AC
power
cord and
position
the
cord
in the
cabinet
opening
provided.
3)
Plug
the AC Power
Cord into
an AC
power
outlet.
The
unit
will
automatically
switch
from
battery to
AC
operation.
{}
power
outlel
AC 120 V
@
?
AC
Dull Red
POWER
POWER
'.1,2
-o-
o
/l\
.-
With weak
batteries, the
sound
will
become dis-
torted,
especially at
high
volume levels.
Io,t_.-l
POWER
o
-2-