EasyManua.ls Logo

Panasonic RF-D10

Panasonic RF-D10
8 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
RQTN0174
System settings
To view the System menu
When in DAB mode
1 Press [MENU].
2 Turn [ TUNE/SELECT ] to select “System” and then press [ENTER].
When in FM mode
Press [MENU].
To navigate around the menu
Turn [ TUNE/SELECT ] to select an item or option. Press [ENTER] to confirm.
Example: Backlight setting displays
Alarm The Alarm Wizard is shown.
Alarm: On, Off
Select “On” to switch on the alarm.
On time: Set the hours and minutes of start time.
Source: Buzzer, DAB, FM
Set the audio source.
If FM or DAB is set, select the last station you tuned in to (“Last listened”) or a preset
station as the audio source.
Set the volume
The alarm starts at a low volume and increases gradually to the preset level.
” is shown after you set the alarm.
Note:
The alarm does not work when the unit is powered by batteries.
Check that the date and time are set correctly, or else the alarm may not work as desired.
The alarm will come on at the set time every day for a duration of 90 minutes. Press any button or
turn any knob to stop the alarm.
You need to set the alarm again every time you disconnect and connect the AC power, or after
you replace the batteries.
Sleep The sleep timer switches off the unit after the set time (in minutes).
Sleep Off, 30 minutes, 60 minutes, 90 minutes, 120 minutes
” is shown.
Equaliser Flat, Heavy, Soft, Clear, Vocal
” is shown.
Time The time and date information are updated automatically with the DAB/RDS broadcast
(if available).
You can also set the time and date manually with the Time menu.
This is a 24 hour clock.
Set time: Set the hours and minutes.
Set date: Set the day, month and year.
Backlight 10 sec: The backlight switches off after 10 seconds of inactivity.
On: The backlight is always on.
Language You can change the language for the display panel.
English, Italiano, Deutsch, Français
Factory Reset Yes, No
Select “Yes” to reset the unit to factory default setting.
Indicates current setting
rf-d10gn.book Page 8 Friday, January 3, 2014 5:01 PM
printing

Related product manuals