Panasonic RP-HTX80B - Operation - Music Playback; Listening to Music and Remote Control; Controlling Playback Functions

Operation
10
Listening to music
If the Bluetooth
®
compatible device supports the “A2DP” and “AVRCP” Bluetooth
®
profiles, music can be
played back with remote control operations on the unit.
• A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.
• AVRCP (Audio/Video Remote Control Profile): Allows remote control of the device using the unit.
1 Connect the Bluetooth
®
device and the unit. (l 8, “Connecting a Bluetooth
®
device”)
2 Select and play the music on the Bluetooth
®
device.
• The selected music is output to the speakers of the unit.
• Operating time:
The maximum playback time is approximately 6 hours. (It may become shorter depending on the usage
conditions.)
∫ Attention
• The unit might leak sound depending on the volume level.
• When the volume is increased to near maximum level, music may sound distorted. Decrease the volume until the
distortion is cleared.
You can control the Bluetooth
®
device using the unit.
• Depending on the Bluetooth
®
device or the app, even if you press buttons on the unit, some functions may not
respond or may operate differently from the descriptions below.
(Operation example)
Note
• The volume can be adjusted in 16 levels. When the maximum or minimum volume is reached, a beep will sound.
Remote controlling
Function Operation
Play / Pause Press [ ].
Increase the volume Press [+ (9)].
Decrease the volume Press [– (:)].
Forward to the start of next
track
Press and hold [+ (9)] for approximately
2 seconds.
Return to the start of current
track
Press and hold [– (:)] for approximately
2 seconds.