Panasonic RQ-V185 - Preparations (continued); Battery Operation

\
Preparations (continued)
Battery operation-
Battery installation
Install the 2 UM-3 batteries (Panasonic R6/LR6 or equivalent, not
included) as shown in the figure.
2 Insert 2 UM-3 (Panasonic R6/LR6 or equivalent) batteries.
To prevent possible damage to this unit
Load new batteries with their polarities {© and ©) aligned
correctly.
Do not apply heat to batteries, or internal short-circuit may
occur.
If this unit is not to be used for a long period of time, or used
on AC power source, remove all batteries and store them in a
cool and dry place.
Remove used batteries immediately.
Do not use old and new batteries together. Also never use an
alkaline battery with a manganese battery.
Battery removal
Press the 0 side toward the © battery terminal and lift up.
Battery life
When the batteries are weak, the OPR/BATT (operation/battery
check) indicator will become dim or turn off during operation, and this
unit will turn off to protect the memorized contents.