Wash
in water
Hand-wash by pushing
• Do not hand-wash by
rubbing or use a washing
machine
(To prevent shrinking or
deformation)
• Dry it completely
Click
Maintenance
2
Remove rubbish from
the air intake
● If you cannot remove it, detach
the rotating brush and perform
maintenance. (P.EN20)
①
Attach the sponge fi lter
②
Close the dust box
③
Put the dust box back
into the main unit
■Sponge lter■Net lter ■Filter■Dust box
You can wash with
water if the dust box is
especially dirty
(Dry completely before putting
it back in place)
3
Reassemble the dust box and
put back into the main unit
●
Do not use substances such as detergent, benzene, thinner, or alcohol (to avoid cracks and color change)
●
Please dry the dust box completely for about 24 hours in a well-ventilated place. (To avoid odor or clog)
●
Please do not use a blow dryer or similar to dry it (to avoid deformation and malfunction)
Request
1
Carefully remove
rubbish, dust etc.
Remove dust
by tapping it
gently
●Do not press the maintenance brush fi rmly on the fi lter. (To avoid tearing)
Request
Maintenance
brush
Push the center
EN19
Maintenance
To Next Page
Loading...
