Panasonic RX-FS430

Listening to Radio Broadcast
FM STEREO
1 SELECTOR Set SELECTOR to RADIO.
2 BAND Set BAND to the desired radio
== = band.
FM STEREO: To receive FM stereo
broadcasts
(If you have tuned into
an FM stereo broad-
cast, the FM STEREO
indicator will light.)
AM: To receive AM broad-
casts
elf FM stereo reception is poor, set BAND to FM. This
will reduce the noise and provide clear reception;
however, the broadcast will not be heard in stereo.
3 = Use TUNING to tune into a de-
sired broadcast.
4 owe es, Adjust VOLUME and TONE.
gw a w dl
The radio can be turned off by setting SELECTOR to TAPE/
CH3.
Adjust the antennas E)
FM:
Pull out the telescopic antenna and adjust its length and
angle for optimum reception.
AM:
Tum the unit in the direction which gives the best results.
How to use headphones
eReduce the volume level. Connect the headphones to the
headphones jack.
eAvoid listening for prolonged periods of time to prevent .
hearing damage.
Speakers are automatically cut off when the headphones
are connected.
(not included)