Panasonic RX-FT560 - Removal of the Mechanism; Removal of the Graphic Equalizer P.C.B.; Removal of the Graphic Equalizer Chassis and Knobs; Removal of the Main P.C.B.

-
- ----- -
Ref. No.7
Removal of the Mechanism
Procedure
1. Remove 3 screw (a - 0)
2+5-7
I
----- I
Mechon~sm
Remove 3 connectors (CP2, CP3, CP4)
Ref. No.8
' Removal of the Graphic Equalizer
P.C.B.
C - - -- -1 --
1 1. Remove the cover chassis in the direction
of arrow
0.
+ j7-
2. Pull out the XBS button in the direction of arrow.
A
3. Pull out the Graphic Equalizer P.C.B. in the
drrection of arrow @.
----
.
GRAPHIC
EQUALIZER
!
Ref. No.9 ~~~3~l~J",'~8~P~~~ Equalizer i Ref. No10 Removal of the Main P.C.B.
Procedure
1. Releaseclawsin thedirection of arrowsand removethe
- --
chassis.
2-t -t 1 2. Release the ribs in the direction of arrows.
7+8+9
Procedure
/ 1. Remove the connectors (CP1 and CP501).
2-5- 2.Remove5screws(@-g).
7 + 8-10 1 3. Release the ribs and remove the main P.C.B.
Ref. No.11 Removal of the Battery P.C.B.
Ref.
No.12
Removal of the Power P.C.B.
Procedure
\
1
Release the claw In the direction of arrow
and then remove the
1
battery P.C.B. in the direction of arrow @
Procedure
2 -12
1. Remove 3 screw (
- b) )
2. Release the rib and remove the transformer.